View NU-33B54B-R-A_4118603.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Optoway
NU-33B54B-R / NU-33B54B-P / NU-33B54B-R / NU-33B54B-P
NU-33B54B-R/-P
1
***********************************************************************************************************************************************************************
155 Mbps 1310 nm Burst Mode TX / 622 Mbps 1490 nm Continuous-Mode RX 3.3V, 2X5 SFF Package, Class B B-PON ONU Transceiver
**********************************************************************************************************************************************************************
FEATURES
l Optical Network Unit (ONU) for ITU-T G.983.3 Class B B-PON l 1-Fiber Bi-directional WDM SM Transceiver l 155 Mbps / 1310 nm Burst-Mode Transmitter l 622 Mbps / 1490 nm Continuous-Mode Receiver with 2R Output l 2x5 Package with SC Receptacle: NU-33B54B-R l 2x5 Package with SC/PC Pigtail: NU-33B54B-P l 0 to 70oC Operating Temperature: NU-33B54B-R l -40 to 85oC Operating Temperature: NU-33B54B-R-A l Single +3.3 V Power Supply l LVPECL Differential Inputs and Outputs l LVTTL TX Shutdown Input l LVTTL RX Loss Signal Output l Wave Solderable and Aqueous Washable l Class 1 Laser International Safety Standard IEC 60825 Compliant
DESCRIPTION
NU-33B54B series is optical network unit (ONU) for ITU-T G.983.3 B-PON with 622 Mbps in downstream and 155 Mbps in upstream. The NU-33B54B series is high performance module for Point-to-Multi-Point (M2MP) system by using 1310 nm burst-mode transmitter and 1490 nm continuous-mode receiver. The transmitter section uses a 1310 nm multiple quantum well laser and is a class 1 laser compliant according to International Safety Standard IEC 60825. The receiver section uses an integrated 1490 nm / 1550 nm detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. LVPECL interface is used for differential inputs and outputs. A LVTTL logic interface simplifies interface to external circuitry.
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It complies with IEC 60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug.
APPLICATIONS
l Fast Ethernet PON System l Broadband PON System l ATM PON System
ORDER INFORMATION
P/No. TX RX
Type
BM BM BM BM
Speed (Mb/s)
155 155 155 155
(nm)
1310 1310 1310 1310
Power (dBm)
2 to -4 2 to -4 2 to -4 2 to -4
Type
CNT, 2R CNT, 2R CNT, 2R CNT, 2R
Speed (Mb/s)
622 622 622 622
(nm)
1490/1550 1490/1550 1490/1550 1490/1550
Sens. (dBm)
-29 -29 -29 -29
Sat. (dBm)
-5 -5 -5 -5
Temp. (oC)
0 to 70 -40 to 85 0 to 70 -40 to 85
PIN 2X5 2X5 2X5 2X5
Package SFF Rec. SFF Rec. SFF Pig. SFF Pig.
NU-33B54B-R NU-33B54B-R-A NU-33B54B-P NU-33B54B-P-A
NOTE: 1. XX-XXXXXX-K, K=R, SC RECEPTACLE, K=P, SC/PC PIGTAIL WITH FIBER LENGTH 50 CM. 3. BM: Burst Mode; CNT: Continuous Mode; SFF: Small Form Factor Package.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
12/1/2004 V3.0
Optoway
Absolute Maximum Ratings
Parameter Power Supply Voltage Input Voltage Output Current Operating Temperature Storage Temperature Soldering Temperature Bending Radius of Fiber Symbol Vcc Iout Topr Tstg Min. 0 GND 0 0 -40 30 Max. 4 Vcc 30 70 85 260 Unit V V mA o C o C o C mm
NU-33B55B-R/-P
Notes
2
***********************************************************************************************************************************************************************
With air flow 1m/sec 10 seconds on leads only For pigtail product
Stress in excess of the maximum absolute ratings can cause permanent damage to the module.
Recommended Operating Conditions
Parameter Power Supply Voltage Power Supply Current Operating Temperature Symbol Vcc Icc TX+RX Topr Min. 3.13 0 Max. 3.47 250 70 Unit V mA o C Notes
With air flow 1m/sec
Transmitter Specifications ( 0oC < Topr < 70oC, 3.13V < Vcc < 3.47V )
Parameter Optical Optical Transmit Power Output Center Wavelength Output Spectrum Width Extinction Ratio Background Light Symbol Po RMS ER BDL Min. -4 1260 10 -35 170 2.0 2.0 -120 1 Typ. Max. 2 1360 4 Units dBm nm nm dB dBm Mb/s ns ns dB/Hz ns A A mV V V V V s Notes 1 RMS () Without Input to Transmitter 10% to 90% Values 10% to 90% Values
1310
Data Rate 155 Optical Rise Time 1.0 Optical Fall Time 1.0 Relative Intensity Noise RIN Total Jitter Electrical Data Input Current - Low -350 Data Input Current - High Differential Input Voltage VIH - VIL 300 Data Input Voltage - Low VIL - VCC -2.0 Data Input Voltage -- High VIH - VCC -1.1 Shutdown Input Voltage -- Low VTSHDN,L 0 Shutdown Input Voltage -- High VTSHDN,H 2.0 Shut Off Time for Tx Shutdown tDIS 1. Output power is power coupled into a 9/125 m single mode fiber. 2. These inputs are compatible with 10K, 10KH and 100K ECL and LVPECL inputs.
350 1600 -1.58 -0.74 0.8 Vcc 30
3 3 TX Output Disable TX Output Enable
************************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
12/1/2004 V3.0
Optoway
Receiver Characteristics ( 0oC < Topr < 70 oC, 3.13V < Vcc < 3.47V )
Parameter Optical Sensitivity Saturation Optical Power Wavelength of Operation Signal Detect Assert Level Signal Detect Deassert Level Signal Detect Hysteresis Data Rate Optical Return Loss Electrical Data Output Voltage - Low Data Output Voltage - High SD Output Voltage -- Low SD Output Voltage -- High Signal Detect Assert Time Signal Detect Deassert Time Symbol Sen Sat Pa Pd Min. Typ. Max. -29 -5 1480 -40 1.0 622 14 VOL - VCC V OH - VCC VOL - VCC V OH - VCC ASMAX ANSMAX -2.0 -1.1 2.0 100 300 -1.58 -0.74 0.8 1500 -29 4.0 650 Units dBm nm
NU-33B55B-R/-P
Notes 4 4 5,6
3
***********************************************************************************************************************************************************************
dB Mb/s dB V V V V s s 7 7
OFF to ON ON to OFF
4. Sensitivity and saturation levels at BER 1E-10 for a 223-1 PRBS @ER=10. 5. At least 30 dB optical isolation for the wavelength 1260 to 1360 nm. 6. 7. These inputs are compatible with 10K, 10KH and 100K ECL and LVPECL outputs.
CONNECTION DIAGRAM
PIN 1 2 3 4 5 6 7 8 9 10 MS
I/O
Symbol RXGND RXVCC LOS RD- RD+ TXVCC TXGND TX SHUT TD+ TDMS
Notes Directly connect this pin to the receiver ground plane +3.3V dc power for the receiver section Loss Signal Output. Active "Low" indicates a loss of receiving optical signal. Receiver Dataout Bar. See recommended circuit schematic Receiver Dataout. See recommended circuit schematic +3.3V dc power for the transmitter section Directly connect this plan to the transmitter ground plane Transmitter Shutdown Input. Active Low. Connect this pin to +3.3V TTL logic "0" to disable TX. This pin is internally pulled to "High". Transmitter Data In. See recommended circuit schematic Transmitter Data In Bar. See recommended circuit schematic Mounting Studs. Connect to Chassis Ground
O O O
I I I
************************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
12/1/2004 V3.0
Optoway
RECOMMENDED CIRCUIT SCHEMATIC
7 Vcc 3.3V 8 BEN (LVTTL) 130R LD Driver TX10 Z=50R 130R TX GND
NU-33B55B-R/-P
4
***********************************************************************************************************************************************************************
Vcc 3.3V
LVPECL TX+ TX Vcc 9 6 1uH 10nF 10uF 1uH Z=50R Vcc 3.3V 82R 82R
RX Vcc
2 10nF 10uF Vcc 3.3V
RX+ 5 Z=50R Post Amp RX- 4 Z=50R 3 SD (LVTTL) 100R
TD+ LVPECL TD-
depend on customer's PHY RX GND SFF ONU Module 1 CDR or PHY DEVICE
PACKAGE DIAGRAM
Units in mm 1) SC Receptacle
49.40 11.98 29.82
10.16
1.78
4.91
************************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
3.48
9.80 max
13.59 max
12/1/2004 V3.0
Optoway
2) Pigtail
50050 11.98 49.40 29.82
NU-33B55B-R/-P
5
***********************************************************************************************************************************************************************
10.16
1.78
4.91
Note: Specifications subject to change without notice.
************************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
3.48
9.80 max
13.59 max
12/1/2004 V3.0

▲Up To Search▲

Price & Availability of NU-33B54B-R-A

	To Download NU-33B54B-R-A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .